Watch Dev Kit v1.1(Excluding Core)

SKU:A128

Description

Watch v1.1 Dev Kit (Excluding Core) is a watch kit adapted to M5Core host which in addition to powerful development hardware,exquisite appearance makes it can be used as smart wearable device,the kit is designed for the M5Core series,in addition to the cool strap is also equipped with a 700mAh lithium battery,allowing users to use the device while having enough reliable battery life.

Note: This product is compatible with M5Core2 and M5CoreS3.If combined with Core2,it can be locked with two M3*18 cup head screws.

Features

Compatible with Basic core/Core/CoreS32
700mAh lithium battery

Includes

1x strap base
1x M-BUS board
1x 700mAh battery
2x telescopic card pin
2x M3x15 screws
2x M3x16 screws
2x M2x5 screws
2x HEX KEY
1x disassemble screwdriver

Applications

smart watch

Specifications

Resources	Parameters
Strap size and weight	260mm x 22mm / 18g
Base dimensions and weight	54.3mm x 54.3mm x 7mm / 25g
Product Size	54.3 x 54.3 x 7mm
Package Size	125 x 67 x 23mm
Product Weight	57g
Package Weight	108g

Assembly step

Assembling the strap: Insert the matching telescopic card into the strap fixing hole, and have two small holes on both sides of the base of the watch. Place one side of the telescopic card pin into the hole and the other side with the finger. Press and place it. Complete the installation of another strap in the same way.

Install the battery: Plug the lead wire from the battery to the corresponding interface on the host circuit board. After the plug-in is completed, adjust the position of the battery to facilitate the installation of the watch base.

Installation base: According to the position of the BUS bus on the main unit, the watch base is vertically inserted into the main unit and locked with the matching screws to complete the assembly.

Model Size